Rule - H3C MSR Series Command Reference Manual

Views
File policy view
Predefined user roles
network-admin
Parameters
rule-name: Specifies a rule name, a case-insensitive string of 1 to 31 characters.
Usage guidelines
You can configure multiple rewrite rules in a file policy.
Examples
# Create a rewrite rule named rule1 and enter its view.
<Sysname> system-view
[Sysname] sslvpn context ctx
[Sysname-sslvpn-context-ctx] file-policy fp
[Sysname-sslvpn-context-ctx-file-policy-fp] rewrite-rule rule1
[Sysname-sslvpn-context-ctx-file-policy-fp-rewrite-rule-rule1]

rule

Use rule to create a rule for a URI ACL.
Use undo rule to remove a rule from a URI ACL.
Syntax
rule [ rule-id ] { deny | permit } uri uri-pattern-string
undo rule rule-id
Default
No URL ACL rules exist in a URI ACL
Views
URI ACL view
Predefined user roles
network-admin
Parameters
deny: Denies matching packets to pass.
permit: Allows matching packets to pass.
rule-id: Specifies a rule ID in the range of 0 to 65534. If you do not specify a rule ID when creating an
ACL rule, the system automatically assigns it a rule ID. The numbering step is 5 for automatic
numbering of rule IDs. An automatically assigned rule ID takes the nearest multiple of 5 higher than
the current highest rule ID. For example, if the current highest rule ID is 28, the rule is numbered 30.
uri uri-pattern-string: Specifies a URI pattern. The URI pattern can contain a maximum of 256
characters in the format of protocol://host:port/path, where protocol and host are required. See
116 for descriptions of the fields in a URI pattern.
790
Table