Display Blacklist Ip - H3C MSR Series Command Reference Manual

Field
Top victims
Top attack types
Related commands
attack-defense top-attack-statistics enable

display blacklist ip

Use display blacklist ip to display IPv4 blacklist entries.
Syntax
Centralized devices in standalone mode:
display blacklist ip [ source-ip-address [ vpn-instance vpn-instance-name ] [ ds-lite-peer
ds-lite-peer-address ] ] [ count ]
Distributed devices in standalone mode/centralized devices in IRF mode:
display blacklist ip [ source-ip-address [ vpn-instance vpn-instance-name ] [ ds-lite-peer
ds-lite-peer-address ] ] [ slot slot-number ] [ count ]
Distributed devices in IRF mode:
display blacklist ip [ source-ip-address [ vpn-instance vpn-instance-name ] [ ds-lite-peer
ds-lite-peer-address ] ] [ chassis chassis-number slot slot-number ] [ count ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
source-ip-address: Specifies the IPv4 address for a blacklist entry.
vpn-instance vpn-instance-name: Specifies the MPLS L3VPN instance to which the IPv4 address
belongs. The vpn-instance-name argument is a case-sensitive string of 1 to 31 characters. Do not
specify this option if the IPv4 address is on the public network.
ds-lite-peer ds-lite-peer-address: Specifies the IPv6 address of the B4 element of the DS-Lite tunnel
that transmits packets from the blacklisted IPv4 address.
slot slot-number: Specifies a card by its slot number. If you do not specify a card, this command
displays IPv4 blacklist entries for all cards. (Distributed devices in standalone mode.)
slot slot-number: Specifies an IRF member device by its member ID. If you do not specify a member
device, this command displays IPv4 blacklist entries for all member devices. (Centralized devices in
IRF mode.)
chassis chassis-number slot slot-number: Specifies a card on an IRF member device. The
chassis-number argument represents the member ID of the IRF member device. The slot-number
argument represents the slot number of the card. If you do not specify a card, this command displays
IPv4 blacklist entries for all cards. (Distributed devices in IRF mode.)
count: Displays the number of matching IPv4 blacklist entries.
Usage guidelines
If you do not specify any parameters, this command displays all IPv4 blacklist entries.
Description
Top ten attack statistics by victim.
Attack statistics by attack type.
1026