Rule (Ipv6 Object Policy View) - H3C MSR Series Command Reference Manual

If you specify a nonexistent object group in a rule, the command creates the specified object group
with empty configuration. A rule that contains an object group with empty configuration does not
match any packets.
If you do not specify any options in the undo rule command, the command deletes the entire rule.
Otherwise, the command deletes only the specified part of the rule statement.
You cannot delete a nonexistent rule. You can use the display object-policy ip command to display
rules in an IPv4 object policy.
To use applications or application groups in an object policy, use only PBAR-classified applications.
NBAR-classified applications cannot match any packets. For more information about PBAR and
NBAR, see Security Configuration Guide.
Examples
# Configure a rule to allow packets that match source IPv4 address object group sourceip1 to pass
through during time range time1.
<Sysname> system-view
[Sysname] object-policy ip permit
[Sysname-object-policy-ip-permit] rule pass source-ip sourceip1 logging time-range time1
# Configure a rule to apply DPI application profile profile1 to packets that match source IPv4
address object group sourceip1.
<Sysname> system-view
[Sysname] object-policy ip dpiproc
[Sysname-object-policy-ip-dpiproc] rule inspect profile1 source-ip sourceip1 logging
# Configure a rule to permit packets that match application aaa.
<Sysname> system-view
[Sysname] object-policy ip dpiproc
[Sysname-object-policy-ip-dpiproc] rule pass application aaa
Related commands
app-profile (DPI Command Reference)
display object-policy ip
move rule
object-policy ip
time-range (ACL and QoS Command Reference)
track (High Availability Command Reference)

rule (IPv6 object policy view)

Use rule to configure a rule for an IPv6 object policy.
Use undo rule to partially or completely delete a rule for an IPv6 object policy.
Syntax
rule [ rule-id ] { drop | pass | inspect app-profile-name } [ [ source-ip { object-group-name | any } ]
[ destination-ip { object-group-name | any } ] [ service { object-group-name | any } ] [ vrf vrf-name ]
[ application application-name ] [ app-group app-group-name ] [ counting ] [ disable ] [ logging ]
[ time-range time-range-name ] ] *
undo rule rule-id [ source-ip | destination-ip | service | vrf | application | app-group | counting |
disable | logging | time-range ] *
966