H3C MSR Series Command Reference Manual page 1037

Comware 7 security

Hide thumbs Also See for MSR Series:

Table of Contents

Predefined user roles

network-admin

network-operator

interface-type interface-number: Specifies an interface by its type and number.

slot slot-number: Specifies a card by its slot number. This option is available only when you specify a

global interface, such as a VLAN interface or tunnel interface. If you do not specify a card, this

commands displays attack detection and prevention statistics for all cards. (Distributed devices in

standalone mode.)

slot slot-number: Specifies an IRF member device by its member ID. This option is available only

when you specify a global interface, such as a VLAN interface or tunnel interface. If you do not

specify a member device, this commands displays attack detection and prevention statistics for all

member devices. (Centralized devices in IRF mode.)

chassis chassis-number slot slot-number: Specifies a card on an IRF member device. The

chassis-number argument represents the member ID of the IRF member device. The slot-number

argument represents the slot number of the card. This option is available only when you specify a

global interface, such as a VLAN interface or tunnel interface. If you do not specify a card, this

commands displays attack detection and prevention statistics for all cards. (Distributed devices in

# (Centralized devices in standalone mode.) Display attack detection and prevention statistics on

interface GigabitEthernet 1/0/1.

<Sysname> display attack-defense statistics interface gigabitethernet 1/0/1

Attack policy name: abc

Scan attack defense statistics:

Distribute port scan

Flood attack defense statistics:

SYN-ACK flood

ICMPv6 flood

Signature attack defense statistics:

IP option record route

IP option security

IP option stream ID

AttackTimes Dropped

AttackTimes Dropped