Object group commands
The following matrix shows the feature and hardware compatibility:
Hardware
MSR810/810-W/810-W-DB/810-LM/810-W-LM/810-
10-PoE/810-LM-HK/810-W-LM-HK
MSR810-LMS/810-LUS
MSR2600-10-X1
MSR 2630
MSR3600-28/3600-51
MSR3600-28-SI/3600-51-SI
MSR3610-X1/3610-X1-DP/3610-X1-DC/3610-X1-D
P-DC
MSR 3610/3620/3620-DP/3640/3660
MSR5620/5660/5680
IPv6-related parameters are not supported on the following routers:
•
MSR810/810-W/810-W-DB/810-LM/810-W-LM/810-10-PoE/810-LM-HK/810-W-LM-HK.
•
MSR3600-28-SI/3600-51-SI.
description
Use description to configure a description for an object group.
Use undo description to restore the default.
Syntax
description text
undo description
Default
No description is configured for an object group.
Views
Object group view
Predefined user roles
network-admin
Parameters
text: Specifies a description, a case-sensitive string of 1 to 127 characters.
Examples
# Configure the description as This is an IPv4 object-group for an IPv4 address object group.
<Sysname> system-view
[Sysname] object-group ip address ipgroup
[Sysname-obj-grp-ip-ipgroup] description This is an IPv4 object-group
Object group compatibility
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
940