Ipsec Profile - H3C MSR Series Command Reference Manual

Use undo ipsec { ipv6-policy-template | policy-template } to delete the specified IPsec policy
template.
Syntax
ipsec { ipv6-policy-template | policy-template } template-name seq-number
undo ipsec { ipv6-policy-template | policy-template } template-name [ seq-number ]
Default
No IPsec policy templates exist.
Views
System view
Predefined user roles
network-admin
Parameters
ipv6-policy-template: Specifies an IPv6 IPsec policy template.
policy-template: Specifies an IPv4 IPsec policy template.
template-name: Specifies a name for the IPsec policy template, a case-insensitive string of 1 to 63
characters.
seq-number: Specifies a sequence number for the IPsec policy template entry, in the range of 1 to
65535. A smaller number indicates a higher priority.
Usage guidelines
The configurable parameters for an IPsec policy template are similar to the parameters that you use
when you configure an IKE-based IPsec policy. However, all parameters except for the IPsec
transform sets and the IKE peer are optional for an IPsec policy template.
An IPsec policy template is a set of IPsec policy template entries that have the same name but
different sequence numbers.
With the seq-number argument specified, the undo command deletes an IPsec policy template
entry.
An IPv4 IPsec policy template and an IPv6 IPsec policy template can have the same name.
Examples
# Create an IPsec policy template entry and enter the IPsec policy template view. The template
name is template1 and the sequence number is 100.
<Sysname> system-view
[Sysname] ipsec policy-template template1 100
[Sysname-ipsec-policy-template-template1-100]
Related commands
display ipsec { ipv6-policy-template | policy-template }
ipsec { ipv6-policy | policy }
ipsec { ipv6-policy | policy } isakmp template

ipsec profile

Use ipsec profile to create an IPsec profile and enter its view, or enter the view of an existing IPsec
profile.
Use undo ipsec profile to delete the specified IPsec profile.
546