H3C MSR Series Command Reference Manual page 378

Usage guidelines
The following matrix shows the command and hardware compatibility:
Hardware
MSR810/810-W/810-W-DB/810-LM/810-W-LM/810-10-PoE/
810-LM-HK/810-W-LM-HK/810-LMS/810-LUS
MSR2600-10-X1
MSR 2630
MSR3600-28/3600-51
MSR3600-28-SI/3600-51-SI
MSR3610-X1/3610-X1-DP/3610-X1-DC/3610-X1-DP-DC
MSR 3610/3620/3620-DP/3640/3660
MSR5620/5660/5680
The device supports FTP, TFTP, and HTTP file transfer methods.
format for each method.
Table 45 URL formats
Protocol
FTP
TFTP
HTTP
If the server address is an IPv6 address, bracket the IPv6 address to distinguish the IPv6 address
from the port number. For example, if the server address is 2001::1 and the port number is 21, the
URL is ftp://test:test@[2001::1]:21/test/.
Examples
# Export all portal user offline records to path tftp://1.1.1.1/record/logout/.
<Sysname> system-view
[Sysname] portal logout-record export url tftp://1.1.1.1/record/logout/
# Export portal user offline records in the time rang of 2016/3/4 14:20 to 2016/3/4 15:00 to path
tftp://1.1.1.1/record/logout/.
<Sysname> system-view
[Sysname] portal logout-record export tftp://1.1.1.1/record/logout/ start-time 2016/3/4
14:20 end-time 2016/3/4 15:00
Related commands
display portal logout-record
portal logout-record enable
URL format
ftp://username[:password]@server-addr
ess[:port-number]/file-path
Example: ftp://a:1@1.1.1.1/authfail/
tftp://server-address[:port-number]/file-p
ath
Example: tftp://1.1.1.1/ autherror/
http://username[:password]@server-ad
dress[:port-number]/file-path
Example: http://1.1.1.1/autherror/
Command compatibility
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Remarks
The username and password must be the same
as those on the server.
If the server authenticates only the username, no
password is required.
N/A
The username and password must be the same
as those on the server.
If the server authenticates only the username, no
password is required.
355
Table 45 describes the valid URL