Pki Certificate Attribute-Group - H3C MSR Series Command Reference Manual

undo pki certificate access-control-policy policy-name
Default
No certificate-based access control policies exist.
Views
System view
Predefined user roles
network-admin
Parameters
policy-name: Specifies a policy name, a case-insensitive string of 1 to 31 characters.
Usage guidelines
A certificate-based access control policy contains a set of access control rules that permit or deny
access to the device based on the attributes in the requesting client's certificate.
Examples
# Create a certificate-based access control policy named mypolicy and enter its view.
<Sysname> system-view
[Sysname] pki certificate access-control-policy mypolicy
[Sysname-pki-cert-acp-mypolicy]
Related commands
display pki certificate access-control-policy
rule

pki certificate attribute-group

Use pki certificate attribute-group to create a certificate attribute group and enter its view, or enter
the view of an existing certificate attribute group.
Use undo pki certificate attribute-group to remove a certificate attribute group.
Syntax
pki certificate attribute-group group-name
undo pki certificate attribute-group group-name
Default
No certificate attribute groups exist.
Views
System view
Predefined user roles
network-admin
Parameters
group-name: Specifies a group name, a case-insensitive string of 1 to 31 characters.
Usage guidelines
A certificate attribute group is a set of attribute rules configured by using the attribute command.
Each attribute rule defines a matching criterion for an attribute in the issuer name, subject name, or
alternative subject name field of certificates.
477