Filter Ip-Tunnel Acl - H3C MSR Series Command Reference Manual

Syntax
file-policy policy-name
undo file-policy policy-name
Default
No file policies exist.
Views
SSL VPN context view
Predefined user roles
network-admin
Parameters
policy-name: Specifies a file policy name, a case-insensitive string of 1 to 31 characters.
Usage guidelines
The SSL VPN gateway uses a file policy to rewrite the content of Web page files before forwarding
them to requesting Web access users.
You can configure multiple file policies in an SSL VPN context.
Examples
# Create a file policy named fp and enter its view.
<Sysname> system-view
[Sysname] sslvpn context ctx
[Sysname-sslvpn-context-ctx] file-policy fp
[Sysname-sslvpn-context-ctx-file-policy-fp]
Related commands
sslvpn context

filter ip-tunnel acl

Use filter ip-tunnel acl to specify an advanced ACL for IP access filtering.
Use undo filter ip-tunnel acl to remove the advanced ACL configuration for IP access filtering.
Syntax
filter ip-tunnel [ ipv6 ] acl advanced-acl-number
undo filter ip-tunnel [ ipv6 ] acl
Default
All IP accesses are denied.
Views
SSL VPN policy group view
Predefined user roles
network-admin
Parameters
ipv6: Specifies an IPv6 ACL. Do not configure this keyword if you want to specify an IPv4 ACL.
acl advanced-acl-number: Specifies an advanced ACL by its number in the range of 3000 to 3999. If
a rule in the specified ACL contains VPN settings, the rule does not take effect.
756