Chapter 88 Ripng Command List (Ri Mode Only) - D-Link xStack DGS-3120 Series Cli Reference Manual

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
Chapter 88 RIPng Command List (RI
enable ripng
disable ripng
config ripng {method [no_horizon | split_horizon | poison_reverse ] | update <sec 5-65535> |
expire <sec 1-65535> | garbage_collection <sec 1-65535>}(1)
config ripng ipif [<ipif_name 12> | all] {state [enable | disable] | metric <value 1-15>}(1)
show ripng {ipif <ipif_name 12>}
create ipv6route redistribute dst ripng src [local | static | ospfv3] {metric <value 0-16>}
config ipv6route redistribute dst ripng src [local | static | ospfv3] {metric <value 0-16>}
delete ipv6route redistribute dst ripng src [local | static | ospfv3]
88-1 enable ripng
Description
This command is used to enable RIPng globally.
Format
enable ripng
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To enable RIPng globally:
DGS-3120-24TC:admin#enable ripng
Command: enable ripng
Success.
DGS-3120-24TC:admin#
88-2 disable ripng
Description
This command is used to disable RIPng globally.
Mode Only)
866