Layer 3 Features; Arp; Arp Aging Time; Static Arp - D-Link DGS-3630 Series Reference Manual

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
6.

Layer 3 Features

ARP

IPv6 Neighbor
Interface
IPv4 Static/Default Route
IPv4 Route Table
IPv6 Static/Default Route
IPv6 Route Table
ARP

ARP Aging Time

This window is used to display and configure the ARP aging time settings.
To view the following window, click L3 Features > ARP > ARP Aging Time, as shown below:
The fields that can be configured are described below:
Parameter
Timeout
Click the Edit button to re-configure the specific entry.
Click the Apply button to accept the changes made.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.

Static ARP

This window is used to display and configure the static ARP settings.
To view the following window, click L3 Features > ARP > Static ARP, as shown below:
Figure 6-1 ARP Aging Time Window
Description
After click the Edit button, enter the ARP aging timeout value here.
Figure 6-2 Static ARP Window
73