Table of Contents
Advertisement
1.4.2 5 GHz Operation
The installer must use the configuration utility provided with the device to ensure the channels of operation are in
conformance with the spectrum usage rules.
The device employs a radar detection feature required for European Community and EFTA country operation in the 5 GHz
band. This feature is automatically enabled when the country of operation is correctly configured for any European
Community or EFTA country. The presence of nearby radar operation may result in temporary interruption of operation of this
device. The radar detection feature will automatically restart operation on a channel free of radar.
1.4.3 Transmit Power Control (TPC) for 5 GHz operation
It is recommended not to disable ATPC on the device. However, if you wish to manually set TPC level, use professional installer
services to ensure TPC level is set properly and complies with European regulatory requirements.
NOTE:
The TPC procedure should be repeated when relocating the wireless device within the current wireless network or to a
wireless network in a new location.
1.5 Certification Summary
1.5.1 ETSI (See
ETSI - Certification
AP-9200R
1.5.2 USA (See
USA - Certification
Models
AP-9200R
1.5.3 Canada (See
Models
AP-9200R
1.5.4 UL (See
UL - Certification
1.5.5 CB (See
CB - Test Certificate
ORiNOCO® AP- 9200R - Safety and Regulatory Guide
)
Models
)
Frequency Band
(2.400 - 2.462)GHz
(5.150 - 5.250)Ghz
(5.260 - 5.320)Ghz
(5.500 - 5.720)Ghz
(5.725 - 5.850)Ghz
Canada - Certification
)
Frequency Band
(2.400 - 2.4835)GHz
(5.260 - 5.320)Ghz
(5.500 - 5.720)Ghz
(5.725 - 5.850)Ghz
)
Models
AP-9200R
Pending Certificate
)
Models
AP-9200R
Pending Certificate
Certification/Reference Number
CE
Certification/Reference Number
HZB-NGPAP
Certification/Reference Number
1856A-NGPAP
Certification/Reference Number
Certification/Reference Number
AP-9200R - Regulatory Information
10
Advertisement
Table of Contents
