Statistics Information - Proxim Tsunami MP-8100 Series Reference Manual

1.5.6.5 Temperature Configuration
Enter the following commands to configure the temperature parameters.
System Name(config-mon)# temperature
Possible completions:
exit
high-thershold
interval
low-thershold
reset
System Name(config-mon-temp)# high-thershold 60
System Name(config-mon-temp)# interval 50
Setting Logging Interval to 0 will disable Temperature Log
Logging Interval can take values 0,1 and multiples of 5 upto 60
System Name(config-mon-temp)# low-thershold 50
System Name(config-mon-temp)# reset yes
System Name(config-mon-temp)# exit
System Name(config-mon)#exit
System Name(config)#exit
System Name# show templog
// TEMPERATURE CONFIGURATION //
Current Unit Temperature : 0
High Threshold
Low Threshold
Logging Interval
Log Reset

1.5.7 Statistics Information

System Name# show statistics ?
Possible completions:
black-list
icmp
interface
iparp
no-of-stations-connected
radius-authentication
sitesurvey-info-tbl
wireless-station
wireless-statistics
worp-endPointa
worp-qos
worp-sitesurvey
worp-endPointb
worp-statistics
1.5.7.1 Display the Black List Statistics
System Name# show statistics black-list
// WIRELESS INTERFACE BLACK LIST INFORMATION //
Tsunami MP-8100 Reference Manual
Exits Back to Global Configure Mode
High Threshold Configuration
Temperature Log Interval Configuration
Low Thershold Configuration
Reset Configuration
: 60
: 50
: 50
: 0
Wireless Interface BlackList Information
ICMP Statistics Information
Interface Statistics Information
IP Arp Statistics Information
Number of Station Connected Configuration
Radius Authentication Statistics Information
Display the SiteSurvey Operation Table Information
Wireless Station Statistics Information
Display the Wireless Statistics Information
Display the Worp EndPointA Statistics Information
Display the worp qos statistics
Site Survey Statistics Information
Display the Worp EndPointB Statistics Information
Worp Statistics Information
Command Line Interface
60