Table of Contents
Advertisement
WAGO I/O System Compact
751-9301 Compact Controller 100
15.1.1.2.8 "Firmware Backup" Page
You can find the controller data backup settings on the "Firmware Backup" page.
"Firmware Backup" Group
Table 81: WBM "Firmware Backup" Page – "Firmware Backup" Group
Parameter
Boot Device
Destination
PLC runtime project
Settings
System
Encryption
Encryption passphrase
Confirm passphrase
Note the firmware version!
Restoring the controller operating system ("System" selection) is only permissible
and possible if the firmware versions at the backup and restore times are
identical.
If necessary, skip restoring the controller operating system, or match the
firmware version of the controller to the firmware version of the backup time
beforehand.
Explanation
The storage medium from which the device was
booted is displayed here.
Select the storage location for the backup here.
The data is written to the memory
card.
This selection only appears if a
Memory Card
memory card is inserted and the
device has not been booted from
the memory card.
The data is saved in the file system
Network
and then made available as a
download on the PC.
If you want to save the PLC runtime project, select
this checkbox.
If you want to save the device settings, select this
checkbox.
If you want to back up the operating system of the
device, select this checkbox.
If you want to save the data in encrypted form,
select this button.
Enter the encryption password here.
This input field only appears if the "Encryption"
checkbox is selected.
Enter the encryption password again here to check
it.
This input field only appears if the "Encryption"
checkbox is selected.
Version 1.1.0, valid from FW Version 03.08.07(20)
Appendix 151
Manual
Advertisement
Chapters
Table of Contents
