Enable Sflow - D-Link DGS-3120-24PC Manual

®
xStack DGS-3120 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
Parameters
analyzer_server - The ID of analyzer server that to be deleted.
<value 1-4> - Enter the analyzer server ID value here. This value must be between 1 and 4.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To delete an analyzer server:
DGS-3120-24TC:admin# delete sflow analyzer_server 1
Command: delete sflow analyzer_server 1
Success.
DGS-3120-24TC:admin#

73-10 enable sflow

Description
This command is used to enable the sFlow function on the Switch.
Format
enable sflow
Parameters
None.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
Enable sFlow globally:
DGS-3120-24TC:admin# enable sflow
Command: enable sflow
Success.
DGS-3120-24TC:admin#
661