Enable Clipaging - D-Link DGS-3100 SERIES Cli Manual

enable clipaging

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable pausing of the screen display when the show command output reaches the end of the page:
disable clipaging
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable pausing of the screen display when a command output reaches the end of the page:
DGS3100# config serial_port baud_rate 9600
Success.
DGS3100#
To pause the scrolling of the console screen after each page when a
show command displays more than one page.
enable clipaging
The enable clipaging command pauses the scrolling of the console
screen at the end of each page when issuing a command which
would display more than one screen of information. The default
setting is enabled.
None.
Only Administrator or operator-level users can issue this command.
DGS3100# enable clipaging
Success.
DGS3100#
To disable the pausing of the console screen scrolling at the end of
each page when the command displays more than one screen of
information.
disable clipaging
The disable clipaging command disables the pausing of the
console screen at the end of each page when issuing a command
which would display more than one screen of information. This
causes the console screen to rapidly scroll through several pages.
None.
Only Administrator or operator-level users can issue this command.
DGS3100# disable clipaging
Success.
DGS3100#
DGS-3100 Series Gigabit Stackable Managed Switch CLI Manual
16