Config 802.1X Guest_Vlan Ports; Show 802.1X Guest_Vlan - D-Link DGS-3100 SERIES Cli Manual

config 802.1x guest_vlan ports

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure ports to the Guest VLAN

show 802.1x guest_vlan

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the Guest VLAN configuration information:
Defines a port or range of ports to be members of the Guest VLAN.
config 802.1x guest_vlan ports <portlist> state [enable |
disable]
The config 802.1x guest_vlan ports command defines a port or
range of ports to be members of the 802.1x Guest VLAN. The
802.1x Guest VLAN can be be configured to provide limited network
access to authorized member ports. If a member port is denied
network access via port–based authorization, but the 802.1x Guest
VLAN is enabled, the member port receives limited network access.
For example, a network administrator can use the 802.1x Guest
VLAN to deny internal network access via port–based
authentication, but grant Internet access to unauthorized users.
portlist – A port or range of ports to be configured to the Guest
VLAN.
All – Indicates all ports to be configured to the guest vlan.
Only Administrator or operator–level users can issue this command.
DGS3100# config 802.1x guest_vlan ports 1 enable
DGS3100#
Displays configuration information for the Guest VLAN.
show 802.1x guest_vlan
The show 802.1x guest_vlan command displays the Guest VLAN
name, state, and member ports.
None.
None.
DGS3100# show 802.1x guest_vlan
Guest VLAN Table
Guest VLAN : Enable
Guest VLAN name : guestusers
Member : 1
DGS3100#
DGS-3100 Series Gigabit Stackable Managed Switch CLI Manual
136