Initializing Ports For Port Based 802.1X - D-Link xStack DES-6500 User Manual

Initializing Ports for Port Based 802.1x

Existing 802.1x port and MAC settings are displayed and can be configured using the window below.
Click Port Access Entity > PAE System Control > Initialize Port(s) to open the following window:
This window allows you to initialize a port or group of ports. The Initialize Port Table in the bottom half of the window
displays the current status of the port(s).
This window displays the following information:
Parameter
Unit
From and To
Port
MAC Address
Auth PAE State
Backend State
Port Status
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch User Manual
Figure 6- 100. Initialize Port window
Description
Choose the Switch ID number of the line card in the switch stack to be modified.
Select ports to be initialized.
A read only field indicating a port on the Switch.
The MAC address of the Switch connected to the corresponding port, if any.
The Authenticator PAE State will display one of the following: Initialize, Discon-
nected, Connecting, Authenticating, Authenticated, Aborting, Held, ForceAuth,
ForceUnauth, and N/A.
The Backend Authentication State will display one of the following: Request,
Response, Success, Fail, Timeout, Idle, Initialize, and N/A.
The status of the controlled port can be Authorized, Unauthorized, or N/A.
124