802.1X User; Initializing Ports For Port Based 802.1X - D-Link xStack DGS-3600 User Manual

xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch

802.1X User

In the Security folder, open the 802.1X folder and click 802.1X User to open the 802.1X User window. This window will allow
the user to set different local users on the Switch.
Figure 11- 16. 802.1X User and 802.1X User Table window
Enter a User Name, Password and confirmation of that password. Properly configured local users will be displayed in the 802.1X
User Table in the same window.

Initializing Ports for Port Based 802.1X

Existing 802.1X port and MAC settings are displayed and can be configured using the window below.
Click Security > 802.1X > Initialize Port(s) to open the following window:
Figure 11- 17. Initialize Port window
This window allows initialization of a port or group of ports. The Initialize Port Table in the bottom half of the window displays
the current status of the port(s).
213