Mld Snooping Commands - D-Link DGS-3700 Series Reference Manual

DGS-3700 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
MLD S
NOOPING
Back to Section Header
The MLD Snooping Commands in the Command Line Interface (CLI) are listed (along with the appropriate
parameters) in the following table.
C
OMMAND
config mld_snooping
config mld_snooping querier
config mld_snooping
mrouter_ports
config mld_snooping
mrouter_ports_forbidden
enable mld_snooping
disable mld_snooping
show mld_snooping
show mld_snooping group
show mld_snooping
mrouter_ports
show mld_snooping rate_limit
config mld_snooping rate_limit
show mld_snooping forwarding
show mld_snooping static_group
create mld_snooping
static_group
delete mld_snooping
static_group
config mld_snooping
static_group
show mld_snooping statistic
counter
clear mld_snooping statistic
counter
config mld_snooping
data_driven_learning
max_learned_entry
config mld_snooping
data_driven_learning
clear mld_snooping
data_driven_group
show mld_snooping host
C
OMMANDS
P
ARAMETERS
[ vlan <vlan_name 32> | vlanid <vlanid_list> |all ] { state
[enable|disable] | fast_done [enable|disable] | report_suppression
[enable | disable]}
[vlan <vlan_name 32> | vlanid <vlanid_list> |all ] { query_interval
<sec 1-65535> | max_response_time <sec 1-25> |
robustness_variable <value 1-7> | last_listener_query_interval <sec
1-25> | state [enable|disable] |version <value 1-2>}
[vlan <vlan_name 32> | vlanid <vidlist>] [add|delete] <portlist>
[vlan <vlan_name 32> | vlanid <vidlist>] [add|delete]<portlist>
{[vlan <vlan_name 32> | vlanid <vlanid_list>]}
{[vlan <vlan_name 32> | vlanid <vlanid_list> | ports <portlist>]
{<ipv6addr>}} {data_driven}
[vlan <vlan_name 32> | vlanid <vlanid_list> |all ]
{ [static|dynamic|forbidden]}
[ports <portlist>|vlanid <vlanid_list>]
[ports <portlist>|vlanid <vlanid_list>] [<value 1-1000> | no_limit]
{[vlan <vlan_name 32> | vlanid <vlanid_list>]}
{[vlan <vlan_name 32>| vlanid <vlanid_list> ] < ipv6addr >}
[ vlan <vlan_name 32> | vlanid <vlanid_list> ] < ipv6addr >
[vlan <vlan_name 32> | vlanid <vlanid_list> ] < ipv6addr >
[ vlan <vlan_name 32> | vlanid <vlanid_list> ] < ipv6addr > [ add |
delete] <portlist>
[vlan <vlan_name 32> | vlanid <vlanid_list> | ports <portlist>]
<value 1-1024>
[all | vlan_name <vlan_name> | vlanid <vlanid_list>] { state [enable |
disable] | aged_out [enable | disable ] | expiry_time <sec 1-65535>}
[ all | [vlan_name <vlan_name> | vlanid <vlanid_list>] [<ipv6addr >|
all]]
{[vlan <vlan_name 32>| vlanid <vlanid_list> | ports <portlist> | group
Page | 243