32-5 enable igmp_snooping
Purpose
Used to enable IGMP snooping on the switch.
Format
enable igmp_snooping
Description
The enable igmp_snooping command allows you to enable IGMP snooping on the switch.
Parameters
None.
Restrictions
You must have administrator privileges.
Examples
To enable IGMP snooping on the switch:
D G S - 3 2 0 0 - 1 0 : 4 # e n a b l e i g m p _ s n o o p i n g
C o m m a n d : e n a b l e i g m p _ s n o o p i n g
S u c c e s s .
D G S - 3 2 0 0 - 1 0 : 4 #
32-6 disable igmp_snooping
Purpose
Used to disable IGMP snooping on the switch.
Format
disable igmp_snooping
Description
The disable igmp_snooping command disables IGMP snooping on the switch. IGMP snooping can be
disabled only if IP multicast routing is not being used. Disabling IGMP snooping allows all IGMP and IP
multicast traffic to flood within a given IP interface.
Parameters
None.
DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
241