Enable Igmp_Snooping; Disable Igmp_Snooping - D-Link DGS-1100-16/ME Reference Manual

Command
show igmp_snooping
static_group
Each command is listed in detail, as follows:

enable igmp_snooping

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable IGMP snooping on the Switch:

disable igmp_snooping

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable IGMP snooping on the Switch:
DGS-1100/ME Metro Ethernet Managed Switch CLI Reference Guide
Parameter
[all | [vlan_name <vlan_name 8> | vlanid <vidlist 1-4094>]<ipaddr>]
To enable IGMP snooping on the Switch.
enable igmp_snooping
The enable igmp_snooping command enables IGMP snooping on
the Switch.
If MLD snooping is also enabled, this operation may fail due to the
total number of group entry exceeding the limitation of the group
table.
None.
Only administrator-level users can issue this command.
DGS-1100-24P/ME:admin#enable igmp_snooping
Command : enable igmp_snooping
Success.
DGS-1100-24P/ME:admin#
To disable IGMP snooping on the Switch.
disable igmp_snooping
The disable igmp_snooping command disables IGMP snooping on
the Switch. Disabling IGMP snooping allows all IGMP and IP
multicast traffic to flood within a given IP interface.
None.
Only administrator-level users can issue this command.
DGS-1100-24P/ME:admin#disable igmp_snooping
Command : disable igmp_snooping
Success.
90