Disable Igmp_Snooping - D-Link DGS-3100 SERIES Cli Manual

DGS-3100 Series Gigabit Stackable Managed Switch CLI Manual

disable igmp_snooping

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
TTo disable IGMP snooping on the Switch:
show igmp_snooping
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show igmp snooping:
101
Success.
DGS3100#
To disable IGMP snooping on the Switch.
disable igmp_snooping
The disable igmp_snooping command disables IGMP snooping on
the Switch. IGMP snooping can be disabled only if IP multicast
routing is not being used. Disabling IGMP snooping allows all IGMP
and IP multicast traffic to flood within a given IP interface.
None.
Only Administrator or operator-level users can issue this command.
DGS3100# disable igmp_snooping
Success.
DGS3100#
To show the current status of IGMP snooping on the Switch.
show igmp_snooping {vlan <vlan_name 32>}
The show igmp_snooping command displays the current IGMP
snooping configuration on the Switch.
<vlan_name 32> − The name of the VLAN for which IGMP snooping
configuration is to be displayed.
None.
DGS3100# show igmp_snooping
IGMP Snooping Global State
Multicast Filtering
Vlan Name
Host Timeout
Leaver Timer
Route Timeout
State
: Disabled
: Enabled
: default
: 260
: 10
: 300
: Disabled