Show Igmp_Snooping Static_Group - D-Link DGS-1100-16/ME Reference Manual

Parameters
Restrictions
Example usage:
To show igmp snooping group:

show igmp_snooping static_group

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To view the IGMP snooping host table on the Switch:
DGS-1100/ME Metro Ethernet Managed Switch CLI Reference Guide
groups).
all – Display all the IGMP snooping group enties.
vlan_name <vlan_name 8> − The name of the VLAN that IGMP
snooping group configuration information will to be displayed on. Up
to 8 characters can be used.
vlanid <vidlist 1-4094> − The ID of the VLAN that IGMP snooping
group configuration information will to be displayed on.
ports<portlist> − A port or a range of ports that IGMP snooping
group configuration information will be displayed on.
ipaddress<ipaddr> − Specifies the IGMP Snooping group IP address
to be displayed.
None.
DGS-1100-24P/ME:admin#show igmp_snooping group all
Command : show igmp_snooping group all
Total Entries: 0
DGS-1100-24P/ME:admin#
To display the IGMP snooping multicast group static member port on
the Switch.
show igmp_snooping static_group [all | [vlan_name
<vlan_name 8> | vlanid <vidlist 1-4094>]<ipaddr>]
The show igmp_snooping static_group command displays the
IGMP snooping multicast group static member ports currently
configured on the Switch.
all – Display all IGMP Snooping static group configuration.
vlan_name <vlan_name 8> – Specifies the VLAN name of IGMP
Snooping to be displayed.
vlanid <vidlist 1-4094> – Specifies the VLAN ID of IGMP Snooping
to be displayed.
<ipaddr> – Specifies the IGMP Snooping group IP address to be
displayed.
None.
DGS-1100-24P/ME:admin#show igmp_snooping static_group all
Command : show igmp_snooping static_group all
VLAN ID/Name IP Address Static Member Ports
100