Show Aliases - D-Link DES-7200 Cli Reference Manual

DES-7200 CLI Reference Guide
Related
commands
1.3

show aliases

To display all the command aliases or aliases in special command modes, run the show
aliases command in the privileged EXEC mode.
show aliases [mode]
Parameter
description
Default
Settings
Command
mode
Usage
guidelines
Examples
Chapter 1 CLI Authorization Configuration Commands
user to use the reload command
DES-7210> reload ?
<cr>
You can use the key word all to attribute all sub-commands of reload
to level-1 users:
DES-7210(config)# privilege exec all level 1 reload
After the above setting, you can access the CLI window as level-1
user to use all sub commands of the reload command:
DES-7210> reload ?
at
cancel
in
<cr>
Command
enable secret
Parameter Description
mode Mode of the command represented by the alias.
N/A.
EXEC mode.
Show all the configuration of aliases if the command mode
has not been input.
Following example shows the command alias in the EXEC
mode:
DES-7210# show aliases exec
exec mode alias:
:
reload at a specific time/date
cancel pending reload scheme
reload after a time interval
Description
Set CLI-level password
1-5