Config 802.1P Default_Priority; Show 802.1P Default_Priority - D-Link DGS-1100-16/ME Reference Manual

config 802.1p default_priority

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure the 802.1p default_priority:
DGS-1100-24P/ME:admin#config 802.1p default_priority ports 3-4 Low
Command : config 802.1p default_priority ports 3-4 Low
Success.
DGS-1100-24P/ME:admin#

show 802.1p default_priority

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the 802.1p default_priority:
DGS-1100-24P/ME:admin#show 802.1p default_priority ports 1-4
DGS-1100/ME Metro Ethernet Managed Switch CLI Reference Guide
eth10 SP
Total Entries: 1
DGS-1100-24P/ME:admin#
To specify default priority handling of untagged packets received by
the Switch.
config scheduling {ports <portlist>} [ Low | Medium | High |
Highest]
The configure 802.1p default_priority command allows you to
specify default priority handling of untagged packets received by the
Switch. The priority value entered with this command will be used to
determine the hardware priority queues that the packet will be
forwarded to.
ports<portlist> – A port or range of ports to be configured.
Low – Set the priority to low mode.
Medium – Set the priority to medium mode.
High – Set the priority to high mode.
Highest – Set the priority to highest mode.
Only administrator-level users can issue this command.
To display the setting of 802.1p default_priority.
show 802.1p default_priority {ports <portlist>}
The show 802.1p default_priority command displays the current
configured default priority settings on the switch.
ports<portlist> – A port or range of ports to be displayed.
None.
73