Config 802.1P Default_Priority; Show 802.1P Default_Priority - D-Link DGS-1210/ME series Reference Manual

config 802.1p default_priority

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure 802.1p default priority on the Switch:

show 802.1p default_priority

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the current port 1-5 802.1p default priority configuration on the Switch:
DGS-1210 Metro Ethernet Managed Switch CLI Reference Guide
To assign an 802.1p priority tag to an incoming untagged packet that
has no 802.1p priority tag.
config 802.1p default_priority [<portlist> | all] <priority 0-7>
The config 802.1p default_priority command specifies the 802.1p
priority value an untagged, incoming packet is assigned before being
forwarded to its destination.
<portlist> − A port or range of ports to be configured.
all − Specifies that the config 802.1p default_priority command
applies to all ports on the Switch.
<priority 0-7> − The 802.1p priority value that an untagged, incoming
packet is granted before being forwarded to its destination.
Only administrator or operator level users can issue this command.
DGS-1210-28P/ME:5# config 802.1p default_priority all 4
Command: config 802.1p default_priority all 4
Success.
DGS-1210-28P/ME:5#
To display the currently configured 802.1p priority value that is
assigned to an incoming, untagged packet before being forwarded to
its destination.
show 802.1p default_priority {<portlist>}
The show 802.1p default_priority command displays the currently
configured 802.1p priority value that is assigned to an incoming,
untagged packet before being forwarded to its destination.
<portlist> − A port or range of ports to be displayed.
None.
DGS-1210-28P/ME:5# show 802.1p default_priority 1-5
Command: show 802.1p default_priority 1-5
Port Default Priority Effective Priority
----- ---------------------- -------------------------
1 0
2 0
3 0
4 0
5 0
DGS-1210-28P/ME:5#
4
4
4
4
4
206