Table of Contents
Advertisement
DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet Switch User Manual
SNMP Host Table
The SNMP Host Table window is used to set up SNMP trap recipients.
To view this window, click Maintenance > SNMP Settings > SNMP Host Table as shown below:
The following parameters can set:
Parameter
Host IP Address
User-based Security
Model
Security Level
Community String/
SNMP V3 User Name
To implement your new settings, click Apply.
SNMP v6Host Table
This window is used to specify the IPv6 host IP address to which the trap packets will be sent.
To view this window, click Maintenance > SNMP Settings > SNMP v6Host Table as shown below:
Figure 190. SNMP Host Table menu
Description
Type the IP address of the remote management station that will serve as the SNMP host
for the switch.
SNMPv1 – Specifies that SNMP version 1 will be used.
SNMPV2c – Specifies that SNMP version 2 will be used.
SNMPV3 – To specify that the SNMP version 3 will be used.
NoAuthNoPriv – To specify a NoAuthNoPriv security level.
AuthNoPriv – To specify an AuthNoPriv security level.
AuthPriv – To specify an AuthPriv security level.
Type in the community string or SNMP V3 user name as appropriate.
Figure 191. SNMP V6Host Table menu
160
Hide quick links:
Advertisement
Table of Contents
