Show Snmp Host; Show Snmp V6Host - D-Link DGS-3200 SERIES Cli Manual

6-17 show snmp host

Purpose
Used to display the recipient for which the traps are targeted.
Format
show snmp host { <ipaddr> }
Description
The show snmp host command displays the recipient for which the traps are targeted.
Parameters
Parameters
ipaddr
v6host
Restrictions
user level
Example
D G S - 3 2 0 0 - 1 0 : 4 # s h o w s n m p h o s t
C o m m a n d : s h o w s n m p h o s t
S N M P H o s t T a b l e
H o s t I P A d d r e s s
- - - - - - - - - - - - - - -
1 0 . 4 8 . 7 6 . 1 0 0
1 0 . 5 1 . 1 7 . 1
T o t a l E n t r i e s : 2
D G S - 3 2 0 0 - 1 0 : 4 #

6-18 show snmp v6host

Purpose
Used to display the recipient for which the traps are targeted.
Format
show snmp v6host { <ipv6addr> }
DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
Description
The IP address of the recipient for which the traps are targeted.
If no parameter specified, all SNMP hosps will be diplayed.
Specifies the v6host IP address.
S N M P V e r s i o n
- - - - - - - - - - - - - - -
V 3 n o a u t h n o p r i v
V 2 c
C o m m u n i t y N a m e / S N M P v 3 U s e r N a m e
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i n i t i a l
p u b l i c
79