Canon iR C6800 Series Service Manual page 1371

2) Select [DCON], and click [Connect].
Service Support Tool Ver. 1.81E (DLM0) Selecting Model/Unit
Available Model and Unit
The list shows models and units that
may be connected. Select the PCB for
the machine by clicking.
Selected Model and Unit
Model
Check the selected model/unit, and click the
<Connect> button.
3) Click [Set host name].
Service Support Tool DLM4 (ver.1.81En) Checking the Start
Selected Model and Unit
Model
"If the following preparations have been made, click [OK]."
""
"Turn off the machine."
"Connect the PC and the machine using a network cable."
"Turn on the machine, and start the download mode."
Unit
iR XXXX DCON
iR XXXX Unit
To Unit Selection
Screen
iR XXXX
iR XXXX
BOOT
DCON
G3FAX
HDFormat
Language
RCON
RUI
SYSTEM
Interface
Network
To Main Menu
F-16-89
DCON
Set host name
F-16-90
Connect
OK
Chapter 16
16-65