Canon iR C6800 Series Service Manual page 1393

6) When the machine has made a connection and brings up the following screen, click [OK].
Service Support Tool DLM4 (ver.1.81En) Connecting to the Machine
Selected Model and Unit
Model
Connected Model and Unit
Model
List of System Software for the Target of Connection
The information needed for the job has been obtained.
Check the indicated descriptions, and press [OK].
7) Click [Download the Backup Data].
Service Support Tool DLM4 (ver.1.81En) Selecting a Job
Connected Model and Unit
Model
List of System Software for the Target of Connection
Selecting a SYSTEM Job
Click the job key for SYSTEM.
Write the system software to the
machine.
Recover the system software that
has been backed up.
Save the backup data of the
machine.
Write the saved backup data to the
machine.
iR XXXX Unit
iR XXXX Unit
L a n g u a g e C o u n t r y / R e g i o n
J a p a n e s e J a p a n
iR XXXX Unit
L a n g u a g e C o u n t r y / R e g i o n
J a p a n e s e J a p a n
Connected to 172.16.1.100
SYSTEM
SYSTEM
V e r s i o n S t a t e
0 1 . 2 5 A
OK
F-16-125
Connected to 172.16.1.100
SYSTEM
V e r s i o n S t a t e
0 1 . 2 5 A
System Software Download
Recover the Backup system
Upload the Backup Data
Download the Backup Data
To Unit Selection Screen
F-16-126