Bytes 8 Through 11 Failure Reasons And Actions - HP 316095-B21 - StorageWorks Edge Switch 2/24 Service Manual

Diagnostics
Did the corrective action solve the problem and relieve the reported low
BB_Credit condition?
NO
Contact the next level of support. Exit MAP.
25
A 150 event code indicates a zone merge process failed during ISL initialization.
Either an incompatible zone set was detected or a problem occurred during
delivery of a zone merge frame. This event code always precedes a 070 event
code, and represents the reply of an adjacent fabric element in response to a zone
merge frame.
Obtain supplementary event data for each 150 event code.
1. At the Hardware View, click Logs > Event Log. The Event Log displays.
2. Examine the first 12 bytes (0 through 11) of event data.
3. Bytes 0 through 3 specify the E_Port number (00 through 23) reporting the
Table 18: Bytes 8 through 11 Failure Reasons and Actions
Bytes 8 - 11
01
08
09
0A
F0
F1
F2
26
A zone merge process failed during ISL initialization. The following list explains
the reason:
124
YES
The ISL appears operational. Exit MAP.
problem. Bytes 8 through 11 specify the failure reason as specified in
Table 20.
Invalid data length.
Invalid zone set format.
Invalid data.
Cannot merge.
Retry limit reached.
Invalid response length.
Invalid response code.
Failure reason 01–An invalid data length condition caused an error in a zone
merge frame.
Failure Reason Action
Go to step 26.
Go to step 26.
Go to step 27.
Go to step 27.
Go to step 26.
Go to step 26.
Go to step 26.
Edge Switch 2/24 Service Manual