NEC Univerge sv8500 Manual page 2328

REBOOT
1. To reboot VS-32(Dual):
VS-32> REBOOT
May I do reboot? [Y/N]: y
Calls in progress are disconnected on any condition.
Note:
GET
1. To download the configuration data file from the specified TFTP server:
Name the configuration data file to "sysdata" and save it on the route directory of TFTP server.
VS-32> GET CONFIGDATA P1
The download of configuration was successful.
This command does not verify the normality of the configuration data downloaded from TFTP server. If any
Note:
invalid configuration data is downloaded, first use the INIT CONFIGDATA command to initialize the set-
tings, and then set a correct one.
PUT
1. To upload the configuration data file to specified TFTP server:
The configuration file is uploaded to the route directory of TFTP server with a file name "sysdata."
VS-32> PUT CONFIGDATA P1
The upload of configuration was successful.
VS-32(Dual) [SCA-VS32VA/MG-VS32VA]
Asked whether to execute reboot.
Y=Reboot
N=Cancel
P1: Enter the IP address of TFTP server.
Result is shown.
P1: Enter the IP address of TFTP server.
Result is shown.
VOL.2-2075