Assigning Multicast Forward All Parameters; Bridge Multicast Forward All - Dell PowerConnect 5324 User Manual

Assigning Multicast Forward All Parameters

The Bridge Multicast Forward All page contains fields for attaching ports or LAGs to a device that
is attached to a neighboring Multicast router/switch. Once IGMP Snooping is enabled, Multicast
packets are forwarded to the appropriate port or VLAN.
To open the Bridge Multicast Forward All page, click Switch Multicast Support Bridge
Multicast Bridge Multicast Forward All page in the tree view.
Figure 7-113. Bridge Multicast Forward All
VLAN ID — Identifies a VLAN.
Ports — Ports that can be added to a Multicast service.
LAGs — LAGs that can be added to a Multicast service.
The Bridge Multicast Forward All Router/Port Control Settings Table contains the settings for
managing router and port settings.
Table 7-77. Bridge Multicast Forward All Router/Port Control Settings Table
Port Control Definition
D Attaches the port to the Multicast router or
switch as a dynamic port.
S Attaches the port to the Multicast router or
switch as a static port.
F Forbidden.
Blank The port is not attached to a Multicast router or
switch.
Configuring Device Information
287