Command Modes
User EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the jumbo frames configuration.
console> show ports jumbo-frame
Jumbo frames are disabled
Jumbo frames will be enabled after reset
port storm-control include-multicast
The port storm-control include-multicast Global Configuration mode command enables the
Ethernet Switch Module to count multicast packets together with broadcast packets. To disable
counting of multicast packets, use the no form of this command.
Syntax
port storm-control include-multicast
no port storm-control include-multicast
There are no arguments or keywords for this command.
Default Configuration
Multicast packets are not counted.
Command Modes
Global Configuration mode
User Guidelines
•
To control multicasts storms use the commands port storm-control broadcast enable and
port storm-control broadcast rate.
Example
The following example enables the counting of multicast packets.
console(config)# port storm-control include-multicast
116
Ethernet Configuration Commands