Port Storm-Control Include-Multicast; Port Storm-Control Broadcast Enable - Dell PowerConnect 5324 Command Line Interface Reference Manual

Example
The following example displays the jumbo frames configuration.
Console# show ports jumbo-frame
Jumbo frames are disabled
Jumbo frames will be enabled after reset

port storm-control include-multicast

The port storm-control include-multicast Global Configuration mode command enables the
device to count multicast packets together with broadcast packets. To disable counting of multicast
packets, use the no form of this command.
Syntax
port storm-control include-multicast
no port storm-control include-multicast
There are no arguments or keywords for this command.
Default Configuration
Multicast packets are not counted.
Command Modes
Global Configuration mode
User Guidelines
• To control multicasts storms use the commands port storm-control broadcast enable and
port storm-control broadcast rate.
Example
The following example enables the counting of multicast packets.
Console# configure
Console(config)# port storm-control include-multicast

port storm-control broadcast enable

The port storm-control broadcast enable Interface Configuration mode command enables
broadcast storm control. To disable broadcast storm control, use the no form of this command.
Syntax
port storm-control broadcast enable
Ethernet Configuration Commands
137