Sntp Anycast Client Enable; Sntp Client Enable (Interface) - Dell PowerConnect 3424 Cli Reference Manual

User Guidelines
• Use the sntp client enable (Interface) Interface Configuration mode command to enable the
SNTP client on a specific interface.
Examples
The following example enables the SNTP broadcast clients.
Console(config)# sntp broadcast client enable

sntp anycast client enable

The sntp anycast client enable Global Configuration mode command enables SNTP anycast
client. To disable the SNTP anycast client, use the no form of this command.
Syntax
sntp anycast client enable
no sntp anycast client enable
Default Configuration
The SNTP anycast client is disabled.
Command Mode
Global Configuration mode
User Guidelines
• Polling time is determined by the sntp client poll timer Global Configuration mode
command.
• Use the sntp client enable (Interface) Interface Configuration mode command to enable the
SNTP client on a specific interface.
Examples
The following example enables SNTP anycast clients.
console(config)# sntp anycast client enable

sntp client enable (Interface)

The sntp client enable Interface Configuration (Ethernet, port-channel, VLAN) mode
command enables the Simple Network Time Protocol (SNTP) client on an interface. This
applies to both receive broadcast and anycast updates. To disable the SNTP client, use the no
form of this command.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 9 / 1 3 / 0 6 – F O R P R O O F O N LY
126
Clock