Rep 17 Power Supply Unit - Xerox Phaser 3100MFP Service Manual

REP 17 Power Supply Unit

Parts List on: PL 13
Switch off the electricity to the machine. Disconnect the power cord from the customer supply
while performing tasks that do not need electricity. Electricity can cause death or injury. Moving
parts can cause injury.
Preparation
• Remove the print cartridge.
• Remove the paper tray.
• Remove the output tray assembly,
• Remove the right and left shield, refer to
Removal
1. Remove the power supply unit, Figure 1.
1
Remove 4 connectors,
circled in blue
Replacement
1. Replacement is the reverse of the removal procedure.
Phaser 3100 MFP
WARNING
REP 14
REP 36
Figure 1
04/08
Repairs and Adjustments
2
Remove 9 screws to
remove the power
supply unit
4-43