Rep 11.7-110 Hole Punch Unit, Motor And Sensors - Xerox WorkCentre 5790 Series Service Manual

REP 11.7-110 Hole Punch Unit, Motor and Sensors

Parts List on PL 11.6.
Removal
Switch off the electricity to the machine. Refer to
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury. Moving parts can cause injury.
Take care during this procedure. Sharp edges may be present that can cause injury.
1. Remove the 2K LCSS covers, REP
2. Remove and empty the chad bin, PL 11.6 Item
3. Remove the hole punch unit, motor assembly and sensors,
Xerox® WorkCentre® 5790 Family
WARNING
GP 14. Disconnect the power cord
WARNING
11.1-110.
4.
Figure 1.
May 2013
4-241
Repairs/Adjustments
REP 11.7-110