Table 70: Sib Alarm Messages - Juniper Core Router T Series Hardware Manual

Solution

Table 70: SIB Alarm Messages

Alarm Type LCD Display Message
Red SIB sib-number Failure
SIB sib-number Removed
Yellow Spare SIB Failure
Spare SIB Removed
Check SIB
Related
Documentation
Copyright © 2018, Juniper Networks, Inc.
To troubleshoot the SIBs:
Check the LEDs on the faceplate of each SIB.
1.
Check the LEDs on the craft interface.
2.
Use the CLI to check for alarms—Issue the
3.
alarms..
In Table 70 on page 305, the text in the column labeled "LCD Message" appears in the
display of the craft interface. The text in the column labeled "CLI Message" appears in
the output from the
show chassis alarms
T320 Switch Interface Boards (SIBs) Description on page 85
T320 SIB LEDs on page 86
Maintaining the T320 SIBs on page 286
Overview of Troubleshooting Resources for the T320 Router on page 291
T320 Alarm Messages Overview on page 293
Contacting Customer Support on page 309
Chapter 32: Troubleshooting Components
show chassis alarms
command.
CLI Message
SIB sib-number Fault
SIB sib-number Absent
Spare SIB Fault
Spare SIB Absent
Check SIB
command to view the
305