Set Port Level Command - Avaya P333T User Manual

Cajun_P330-N# set interface ppp enable
Entering the Modem mode within 60 seconds...
Please check that the proprietary modem cable is plugged into
the console port
Cajun_P330-N# set interface ppp disable
Entering the Terminal mode immediately

Set port level Command

Use the set port level command to set the priority level of a port. Packets
traveling through a port set at normal priority should be served only after packets
traveling through a port set at high priority. Packets traveling with a 802.1p priority
header are not affected by this command.
The syntax for this command is:
set port level <mod_num>/<port_num> {normal|high}
normal
high
Example:
To set the priority level for port 2 on module 1 to high:
Cajun_P330-N# set port level 1/2 high
Port 1/2 port level set to high.
Avaya P333T User's Guide
Set the port priority to regular.
Set the port priority to high.
Chapter 6 Cajun Campus CLI – Layer 2
85