Table of Contents
Advertisement
Chapter 2
Avaya P330-ML Layer 2 CLI Commands
The syntax for this command is:
set port disable <mod_num>/<port_num>
module
port
Example:
P330-N# set port disable 4/1
Port 4/1 disabled.
set port dot1x initialize
User level: supervisor
Use the set port dot1x initialize command to initialize port dot1x.
The syntax for this command is:
set port dot1x initialize <module/port>
module/
port
Example:
P330-1(super)# set port dot1x initialize 2/3
port 1/2 dot1x was initialized
set port dot1x max-req
User level: supervisor
Use the set port dot1x max-req command to set the maximal number of times
the port tries to retransmit requests to the Authenticated Station before the session is
terminated.
86
Number of the switch in the stack.
Number of the port on the module. If you do not specify a
number, all the ports on the module are disabled.
You can also specify a range of ports separated by a dash, for
example, 4/5-13 for ports 5 to 13 on switch 4.
Module and port number
You can also specify a range of ports separated by a dash, for
example, 4/5-13 for ports 5 to 13 on switch 4.
Avaya P330-ML Reference Guide
Advertisement
Table of Contents
