Set License; Set Logout - Avaya P460 Reference Manual

Chapter 2 Avaya P460 CLI Commands

set license

User level: read-write, admin.
Use the set license command to activate a licensed feature on a specific P460
chassis.
For a full description of the Feature License and the installation procedure please
refer to the Installation Guide provided with the Feature License.
The syntax for this command is:
set license [license] [featureName]
license
featureName
Example:
P460-1# set license 026
Layer-3 Features had been enabled on this chassis.

set logout

User level: read-write, admin.
Use the set logout command to set the time in minutes until the system
automatically disconnects an idle session.
The syntax for this command is:
set logout [timeout in minutes]
timeout in
minutes
82
The license number
The name of the feature, currently either smon or routing.
The default feature is smon.
9b8
Time until the system automatically disconnects an idle
session.
• Setting the value to 0 disables the automatic disconnection
of idle sessions
• The default value is 15 minutes.
216 908 dea f4d layer-3
Avaya P460 Reference Guide