Chapter 6
Cajun Campus CLI – Layer 2
• set intelligent-
multicast client-
port-pruning time
• set intelligent-
multicast router-
port-pruning time
• set intelligent-
multicast group-
filtering-delay
time
• set secure mac
• set security mode
• set arp-tx-
interval
• set self-loop-
discovery
• set boot bank
Set logout Command
The set logout command is used to set the number of minutes until the system
automatically disconnects an idle session.
The syntax for this command is:
set logout <timeout>
timeout
Example:
To set the number of minutes until the system disconnects an idle session
automatically:
Cajun_P330-N# set logout 20
Sessions will be automatically logged out after 20 minutes of
idle time.
78
Sets the aging time for client ports
Sets the aging time for router ports
Sets the time delay before a filter is
applied to a specific group
Adds a unicast MAC addres into the
CAM table of a secured port
Enables or disables the stack's MAC
security
Sets tkhe keep-alive interval
Sets the IBM token ring discovery mode
Sets the Avaya P330 boot bank
Number of minutes (0 to 999) until the system automatically
disconnects an idle session. Setting the value to 0 disables the
automatic disconnection of idle sessions (default is 15 minutes).
Page 102
Page 102
Page 103
Page 103
Page 103
Page 104
Page 104
Page 104
Avaya P333T User's Guide