Set Logout Command; Set Timezone Command - Avaya P333R-LB User Manual

Set logout Command

The set logout command is used to set the number of minutes until the system
automatically disconnects an idle session.
The syntax for this command is:
set logout <timeout>
timeout
Example:
To set the number of minutes until the system disconnects an idle session
automatically:
P330-N# set logout 20
Sessions will be automatically logged out after 20 minutes of
idle time.
To disable the automatic disconnection of idle sessions:
P330-N# set logout 0
Sessions will not be automatically logged out.

Set timezone Command

Use the set timezone command to assign a timezone name and set the time
difference of your Avaya P330 relative to the Coordinated Universal Time (UTC/
GMT). The minutes parameter can only be set to 30.
The syntax for this command is:
set timezone <zone_name> [-]<hours>[:30]
Example:
set timezone GMT -3:30
Timezone set to 'GMT', offset from UTC is -3:30 hours
Note: If you wish to define a name which includes spaces, you must enclose the
entire name in quotation marks, e.g. "new york".
Avaya P333R-LB User's Guide
Number of minutes (0 to 999) until the system automatically
disconnects an idle session. Setting the value to 0 disables the
automatic disconnection of idle sessions (default is 15 minutes).
Chapter 5 Cajun Campus CLI – Layer 2
95