Chapter 5: Installing the Avaya Virtual
This section provides the information and procedures to install the Avaya Virtual Services Platform
7200 Series.
Installation checklist
Use this checklist to install the Avaya Virtual Services Platform 7200 Series.
No.
Task
1.
Mount the Avaya Virtual Services
Platform 7200 Series in the
equipment rack.
2.
Install the primary or redundant
power supply.
Important:
Avaya does not support a
combination of AC-input and
DC-input power supplies in the
same chassis.
3.
Install the fan modules.
4.
Check the LEDs to verify the
installation.
November 2016
Services Platform 7200 Series
Installing the Avaya VSP 7200 Series
Comments on this document? infodev@avaya.com
Description
See
Installing the switch in an equipment
rack
on page 39.
You have two options for installing the switch in
an equipment rack:
•
Using the optional slide rack mount kit
page 39
•
Using the supplied bracket
If you have an AC power supply, see
an AC power supply
on page 22.
If you have a DC power supply, see
DC power supply
on page 27.
See
Installing a fan module
For a description of the LEDs, see
definitions
on page 35.
on
on page 70
Installing
Installing a
on page 32.
LED state
16