Virtual Router Is Stuck In The Initialize State When It Should Be Master Or Backup - Avaya 5000 Series Troubleshooting Manual

Procedure
1. At the ACLI command prompt, enter the show smlt command to display the SMLT
2. Review the command output to determine whether links from the edge device to
Configuring SMLT ports
About this task
If you determine that SMLT ports are not configured correctly, you can reconfigure SMLT on
the ports.
Procedure
1. At the ACLI command prompt, enter the smlt port <portlist> <1-512>
2. Review the command output to ensure that there are no execution errors.
Displaying logs
About this task
You can display log messages to find errors related to SMLT.
Procedure
1. At the ACLI command prompt, enter the show logging command to review log
2. Review the command output for error messages related to SMLT.
Virtual Router is stuck in the initialize state when it should
be master or backup
You can change the state of a Virtual Router (VR) to master or backup.
Troubleshooting

Virtual Router is stuck in the initialize state when it should be master or backup

configuration and operational mode.
both aggregation devices are open and functioning.
command to change the SMLT configuration.
messages.
December 2013 203