Set Timezone; Set Time Protocol; Set Time Server - Avaya P334T-ML User Manual

Output Example:
To disable the automatic disconnection of idle sessions:
P330-N# set logout 0
Sessions will not be automatically logged out.

set timezone

Use the set timezone command to assign a timezone name and set the time
difference of your P330 relative to the Coordinated Universal Time (UTC/GMT).
The minutes parameter can only be set to 30.
The syntax for this command is:
set timezone <zone_name> <hours | hours:min>
Output Example:
set timezone GMT -3:30
Timezone set to 'GMT', offset from UTC is -3:30 hours
Note: If you wish to define a name which includes spaces, you must enclose the
entire name in quotation marks, e.g. "new york".

set time protocol

Use the set time protocol command to set the protocol for use in the system as either
SNTP protocol or TIME protocol.
The syntax for this command is:
set time protocol
Output Example:
P330-N# set time protocol sntp-protocol
The protocol has been set to SNTP protocol
Output Example:
P330-N#
The protocol has been set to TIME protocol

set time server

The set time server command is used to set the TIME server address.
Avaya P334T-ML User's Guidee
[sntp-protocol|time-protocol]
set time protocol time-protocol
Chapter 6 CLI – Layer 2
103