Table of Contents
Advertisement
Chapter 6
Avaya P130 CLI
The syntax for this command is:
set time client [enable | disable]
Example:
P130-1(super)# set time client enable
Time client mode enable.
P130-1(super)# set time client disable
Time client mode disabled
Set time server Command
Use the set time server command to set the IP address for the time server.
The syntax for this command is:
set time server <IP address>
Example:
P130-1(develop)# set time server 1.2.3.4
The Server Ip has been set to 1.2.3.4
Show time parameters Command
Use the show time parameters command to display the current settings for all
time related parameters.
The syntax for this command is:
show time parameters
Example:
P130-1(develop)# show time parameters
Client status: Enabled
Current time : 03:43:43 04 JUL 2002 UTC
Timezone set to 'UTC', offset from UTC is 0 hours
Time-Server
Time acquired from Time-Server: 149.49.54.192
Time protocol set to
46
: 1.2.3.4
: TIME protocol
Avaya P130 User's Guide
Advertisement
Table of Contents
