New Avaya Ethernet Routing Switch 4000 Series Models; Avaya Identity Engines Ignition Server - Avaya 4550T-PWR+ Fundamentals

New in this release

New Avaya Ethernet Routing Switch 4000 Series models

Release 5.6 introduces the following six new hardware models to the Avaya Ethernet Routing
Switch 4000 Series:
• Avaya Ethernet Routing Switch 4550T-PWR+
• Avaya Ethernet Routing Switch 4526T-PWR+
• Avaya Ethernet Routing Switch 4850GTS
• Avaya Ethernet Routing Switch 4850GTS-PWR+
• Avaya Ethernet Routing Switch 4826GTS
• Avaya Ethernet Routing Switch 4826GTS-PWR+
The new 4500 and 4800 PWR+ models support PoE+, according to the IEEE 802.3at standard,
and can deliver power up to 32W, as opposed to 16W for the 4500 PWR legacy units.
Release 5.6 also introduces one new removable power supply for the Avaya Ethernet Routing
Switch 4000 Series — the ERS4x00 PoE+ PSU, a stackable 1000W AC Power over Ethernet
plus power supply unit.
The PoE+ models include a 1000w power supply that enables full support for 48 ports when
all ports are operating at class 3 802.3af PoE.
On the new PoE+ hardware variants, the switch CPU speed is 533 MHz, and the FLASH is
larger to allow for large images, backup images, and configurations.
The standard ADS console port (DTE) on all new products is an RJ-45 Female Connector: (8
pin RJ45).

Avaya Identity Engines Ignition Server

Avaya Identity Engines Ignition Server (Ignition Server) is an 802.1X-capable RADIUS
authentication server and TACACS+ server that grants or denies users access to your network
based on your policies. When you use Ignition Server you can create a single set of policies
that control access for all user connection methods: over a wired Ethernet jack, wireless, or
VPN.
Ignition Server also authenticates devices and you can configure an 802.1X authentication
bypass for older devices on your network that cannot perform an 802.1X authentication.
10 Fundamentals
Comments? infodev@avaya.com
December 2011